If you are looking for a reliable automatic pool water leveler, I’ll save you some time and money by sharing some facts about water levelers. Right out the door: Stay away from any automatic filling device that connects to a garden hose! They are built primarily from plastic parts that can warp or become brittle due to the sun’s ultraviolet rays. Consequently, they are susceptible to sticking and clogging, resulting in an overflow of the pool with possible flood damage. Second, the hose itself is a disadvantage due to the likelihood that it will become weak by swelling and bursting. Imagine this happening while you are on vacation … water damage, water bill, and perhaps a lawsuit from a flooded neighbor.

Most swimming pools that were built in the last 15 to 20 years are equipped with a built-in toilet tank-shaped water leveler that can have 10 to 15 different moving parts, any of which can be a cause of malfunction. operation due to deformation, breaking, cracking, binding, sticking or loosening. Many of these mechanical water level floats are currently being replaced by electronic type floats such as Levelor, Pentair, Jandy, Savio, Ventura, Sentra or AquaFill.

Pools built before 1980 are filled with a garden hose or a fill line from a remote faucet. Both methods are time-consuming and potentially dangerous, as the person must stand there while the pool is filling or risk forgetting and walking away while the pool is filling. According to the National Association of Insurance Companies, swimming pools, ponds, hot tubs, fountains and overflowing hot tubs are the second highest cost and cause of water damage for homeowners.

Most pool owners don’t realize that there is a solution to this costly and time-consuming situation. There are electronic automatic water levelers that can be easily retrofitted to older pools without cutting the tie beam or surrounding pool cover; does not require remodeling or construction. However, be aware that there are water levelers that use two electrical probes to sense the water level through the electrical resistance and these probes will fog and corrode in acidic, alkaline, and chlorinated water. This, in turn, causes the reading to vary or become non-existent. Additionally, the circuit board required to read resistance is susceptible to condensation during periods of rapid temperature changes, including vulnerability to corrosive saline ocean air along shorelines. The downside to remote control water levelers is that a battery needs to be changed, increasing the pond maintenance schedule.

Ventura, Sentra and AquaFill are the easiest levelers to install and require no maintenance, with hermetically sealed electronics eliminating the possibility of water ingress. A reliable automatic electronic water leveler controller is worth investing in for the time, money, zero hassle, and true peace of mind. Expect to pay as little as $ 70 or as much as $ 450. A water leveler is not an expense, but an investment in freedom. Happy hunting.